AG 704

Substrate type
Concrete and cement substrates, lime, cement-lime and gypsum plasters, lime, gypsum and polymer finish coats, gypsum boards and other gypsum components.

Substrate preparation
The substrate must be clean, sound, dry and free from dust and greasy spots. Remove loose paint coats and plasterwork. Chipped areas and irregularities should be patched with ALPOL AZ 130 quick setting mortar or ALPOL AZ 135 levelling mortar. In case of new plasters, allow at least 2-week seasoning time.

Instructions for use
Carefully mix the primer before application. Apply with a brush or a masonry brush rubbing well against the substrate. In case of highly absorbing substrates repeat priming. For less absorbing substrates, the primmer can be thinned with drinkable water in 1:1 proportion.

Tools
Brush, masonry brush, container.

Working conditions
Work in ambient and substrate temperatures between +5°C and +30°C. Do not add any other agents to the preparation. Protect freshly applied primer from excessive moisture and drying.

Storage
Store in original, unopened packages – shelf life 9 months from production date. Protect from freezing and overheating during transport and storage.

Notes
The specifications and instructions of use are given for the temperature (20±2)°C and relative humidity of air (65±5)%. The drying time may alter in different conditions. Contains mixture of isothiazolinones. May cause allergic reactions. Wear safety goggles. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Protect your skin. Use protective clothing and gloves. Keep away from children. Use water for cleaning tools. The manufacturer accepts no responsibility for damage caused by unskilful or inappropriate use of the product.

General recommendations
Work according to building practice, observing health & safety standards and regulations.