AG 706

Substrate type
Reinforcing layer of thermal insulation systems, cement-lime plasters, concrete substrates.

Substrate preparation
The substrate should be firm, sound, dry, free from dust, dirt, and grease stains. Remove adhesive coats of poor adhesion and patch with a relevant thermal insulation adhesive.

Instructions for use
Carefully mix the primer before application. Repeat mixing while using the primer to avoid sediment build-up on the container bottom. For stained primers, check for consistency with plaster colour. Do not thin with water. Apply with a brush, masonry brush or a roller, rubbing well against the substrate. In case of highly absorbing substrates repeat priming.

Tools
Brush, masonry brush or paint roller, container.

Working conditions
Work in ambient and substrate temperatures between +5°C and +30°C. Do not add any other agents to the preparation. Protect freshly applied primer from excessive moisture and rain.

Storage
Store in original, unopened packages – shelf life 12 months from production date. Protect from freezing and overheating during transport and storage.

Notes
The specifications and instructions of use are given for the temperature (20±2)°C and relative humidity of air (65±5)%. The drying time may alter in different conditions. Wear safety goggles. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Protect your skin. Use protective clothing and gloves. Keep away from children. Use water for cleaning tools. The manufacturer accepts no responsibility for damage caused by unskilful or inappropriate use of the product.

General recommendations
Work according to building practice, observing health & safety standards as well as regulations and the instructions of ALPOL EKO PLUS or ALPOL EKO PLUS WM thermal insulation systems, and the Building Research Institute (ITB) instructions No. 418/2007 and 447/2009.