AM 810

Substrate type
Gypsum, cement, cement-lime and lime plasters, gypsum boards, dispersion and oil paint coats as well as concrete substrates.

Substrate preparation
Substrate should be seasoned, clean, dry, stable and sound. Remove remains of paint and other contamination. Significantly chipped areas should be patched with ALPOL AZ 135 levelling mortar. Treat the loose surface with ALPOL AG 700 or deep penetrating primer to reduce substrate absorption, if necessary. Patch small cracks and scratches with a thin coat of the product. Bubbles in concrete and very coarse plaster surfaces should be filled thoroughly.

Instructions for use
Spread the finish coat with a stainless steel float to form a layer between 1 and 2 mm thick, until smooth and regular finish is achieved. Apply the second coat after the first one has set. After the second coat has dried out, grind all irregularities with sand paper or a grinding mesh. Unused product can be used later, if stored in a tightly closed container. The finish coat is also suitable for machine application.

Tools
Low-speed electric mixer, basket mixer, finish coat application unit, stainless steel floats, putty knife, trowel, hand sander with mesh or sandpaper.

Working conditions
Work in ambient and substrate temperatures between +5°C and +25°C. Low temperature and high air humidity prolong drying time of the finish coat. Do not allow the fresh finish coat to moisten or dry excessively. Attention must be paid to ensure good room ventilation.

Storage
In original, not damaged, tightly closed containers in temperature between +5°C and +25°C – shelf life 12 months from production date. Tightly close the container after its opening. Protect from frost during transport and storage.

Notes
The specifications and instructions for use are given for the temperature of (23±2)°C and relative air humidity of (50±5)%. The workability and technical properties may alter in different conditions Wear safety goggles. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Protect your skin. Use protective clothing and gloves. Keep away from children. Use water to remove fresh dirt or ALPOL AI 770 cleaner to remove hardened dirt. The manufacturer accepts no responsibility for damage caused by unskilful or inappropriate use of the product.

General recommendations
Work according to building practice, observing health & safety standards and regulations.