AZ 123

Masonry components
Clean, dry and not damaged face or clinker bricks.

Instructions for use
Mix all the contents of the bag with specified amount of clean and cold water and stir manually or mechanically to bring the nano-mortar to homogenous and required consistency. Lay bricks with full joints. Apply the mortar with a trowel and remove the excess after smoothening. After initial hardening, profile the joint as required using a grout spreader. Use prepared mix within 3 hours from mixing with water. If the mortar thickens in that period of time, stir it again thoroughly without adding water. Adding too much water impairs all mortar characteristics: adhesion, strength, setting time and resistance to efflorescence. It may also lead the joins to alter their colour. Work carefully and remove any staining without moistening it. Clean and stainless tools are recommended to work with.

Tools
Tilting mixer, low-speed electric mixer, basket mixer, trowel, grout spreader, brush, container for mortar, container for water dosing.

Working conditions
Work in ambient temperatures between +5°C and +25°C. Do not add any other agents to the mortar. Protect fresh masonry work for minimum 7 days from weather conditions by covering it with a membrane. Do not erect face walls in foggy, rainy or hot days.

Storage
Store in original, unopened packages in dry place – shelf life 12 months from production date. Protect from moisture during transport and storage.

Notes
The specifications and instructions for use are given for the temperature of (20±2)°C and relative air humidity of (65±5)%. The workability may alter in different conditions. Becomes alkaline after mixing with water. Irritating to eyes and respiratory system. Appropriate eye, respiratory system and skin protection measures should be used. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Keep away from children. Use water to remove fresh dirt or ALPOL AI 770 cleaner to remove hardened dirt. The manufacturer accepts no responsibility for damage caused by unskilful or inappropriate use of the product.

General recommendations
Perform masonry works according to the Guidelines to Clinker Nano-system, building practice, observing health & safety standards and regulations.

* tabled value
** masonry work with full joint without material loss

Guarantee: 5 years for certified contractors.
Product is a component of the Clinker Nano-System.
Declaration of conformity has been issued for the product.
The factory production control (ZKP) certificate No. 1488-CPD-0010 was issued by the Building Research Institute of Warsaw.
Reference document: PN-EN 998-2:2010.
The product has been approved by the National Institute of Hygiene (PZH).
The Polish Classification of Goods and Services (PKWiU): 23.64.10.0.
Water-soluble chromium (VI) content below 2 ppm.
Fidor, 2010-05-04. The present product sheet is valid and supersedes all previous issues.